Ducted Heating Installation: Essential Options to Consider

Installing ducted heating entails establishing a central unit that efficiently distributes either warm or cool air throughout your home via ducts positioned in the ceiling or beneath the floor. Each room receives air through strategically placed vents, while temperature management is facilitated through a wall-mounted controller. This setup allows for comprehensive climate control across your entire residence. In Melbourne, electric reverse cycle ducted heating has become a preferred choice for homeowners. This system adeptly delivers warmth during winter and cooling in summer through the same vents. Gas ducted heating remains a viable alternative, and this guide provides an extensive comparison of both systems.

This guide thoroughly outlines the ducted heating installation process, highlighting essential components such as system sizing, zoning, ductwork, and the outdoor unit, along with expectations for the installation day. We will explore the operating costs associated with gas systems, the Victorian Energy Upgrades (VEU) rebate relevant to transitioning to electric systems, and crucial questions to pose to any installer before finalising your decision.

Vital Information on Ducted Heating Installation

• The Australian Government’s energy.gov.au indicates that reverse cycle air conditioners have efficiency ratings between 300% and 600%.
• Energy.gov.au also notes that ducted reverse cycle systems operate more economically compared to gas heating systems.
• Most installations can usually be completed within a single day; however, larger homes or intricate duct layouts may require an additional day.
• The VEU rebate is applicable when replacing an old gas heater with a qualifying reverse cycle system.

Which Types of Ducted Heating Solutions Are Best for Your Home?

In Melbourne, homeowners can select from two primary types of ducted heating systems, with an additional option to integrate cooling into an existing gas system.

• Electric Reverse Cycle Ducted Heating and Cooling. This system features both an outdoor and an indoor unit, working in tandem to heat or cool your entire home through a single set of vents. This is the most commonly installed system, with further details available on our ducted reverse cycle air conditioning page.
• Gas Ducted Heating. A gas furnace generates warm air, which is circulated through the ducts by a fan. While gas ducted heating installations still occur, many homeowners in Melbourne are opting to transition away from gas rather than installing new gas heaters.
• Add-on Cooling for an Existing Gas Heater. If your gas ducted heater is relatively modern, an add-on cooling system can be integrated, using the same ducts and controller for cooling purposes.

If your gas heater is ageing, frequently requiring repairs or leading to high operating costs, consider upgrading to an electric reverse cycle ducted system. This option provides both heating and cooling in a single installation. Our comprehensive guide on replacing gas ducted heating with electric heating offers further insights on making this transition.

What Is the Mechanism Behind Reverse Cycle Ducted Heating?

Reverse cycle ducted heating functions by transferring heat instead of generating it. According to the Australian Government’s energy.gov.au heating and cooling guide, reverse cycle air conditioners can convert one unit of electrical energy into three to six times more heating or cooling energy, achieving efficiency ratings from 300% to 600%. In contrast, an electric bar heater transforms one unit of electricity into one unit of heat.

During winter, the outdoor unit extracts heat from the surrounding air and transports it indoors via refrigerant pipes. The indoor unit, situated in the roof space or under the floor, circulates this warm air through the ducts to each vent. The process reverses in summer, enabling the same system to cool your home. For a detailed explanation of how a refrigerated reverse cycle system operates, please refer to our article outlining each component.

How Is Your Ducted Heating System Properly Sized for Optimal Performance?

Proper sizing is essential to ensure that a ducted heating system operates effectively during the chilly mornings in Melbourne. An undersized system struggles to warm distant rooms, whereas an oversized system incurs unnecessary expenses. Energy.gov.au recommends selecting a model with the appropriate capacity for your home and consulting experts before making substantial purchases like ducted heating and cooling.

During our home assessment, we consider the number of rooms and vents, the duct routing (whether through the ceiling or beneath the floor), whether your home is single or multi-storey, and the intended use of each room. Providing house plans can assist us in determining duct runs prior to our visit. For detailed guidance on sizing a ducted heating system tailored specifically to your Melbourne home, refer to our sizing guide.

Is Zoning a Crucial Feature for Your New Ducted Heating System?

Zoning functionality allows you to control which rooms receive heating. For instance, you may prefer to keep bedrooms unheated during the day and living areas unheated at night, rather than heating the entire house simultaneously. If your previous gas ducted heater lacked zoning, it is advisable to install a zoned system during the new installation, as it simplifies the configuration process.

Thermostat settings also significantly impact energy consumption. Energy.gov.au indicates that increasing heating by each degree in winter can elevate your energy consumption by 5% to 10%. Many systems we install are controllable via mobile applications, allowing you to activate the heating before arriving home from work, ensuring a warm environment upon your arrival without the need for continuous operation throughout the day.

What Adjustments Are Made to Ductwork and Vents During Installation?

Each system installation includes the fitting of new ducting. Existing ducting from an old gas heater often does not suit a reverse cycle system and is typically filled with dust from years of use. The new ducting is correctly sized for both heating and cooling, connecting to the same outlet points in your ceiling or floor, resulting in new vents and grilles instead of patched openings from the previous system.

For ceiling installations, we access the roof space by removing tiles or sheets, dismantling the old unit and ducts, and fitting the new system and ductwork in their place. Approximately one-third of the homes we encounter have floor ducting, where the indoor unit is installed in the subfloor, requiring careful handling due to limited access.

Where Is the Optimal Location for the Outdoor Unit?

A reverse cycle ducted system comprises both an outdoor and an indoor unit, interconnected through pipes that transport refrigerant. The outdoor unit is positioned outside the house. We discuss its placement with you during the in-home assessment, and if your property presents challenges, we identify the most suitable location prior to the installation day.

What Is the Typical Timeframe for Ducted Heating Installation?

Most ducted heating installations are completed within a single day, although larger homes or more intricate duct layouts may extend the installation to a second day. We confirm the expected duration during our assessment, ensuring you are informed about what to anticipate before work commences.

On the installation day, our team removes the old heater, installs the new ducting and vents, sets up both the indoor and outdoor units, and connects the controller. As licensed mechanical plumbers, we can also cap the gas line of the old heater during the installation, eliminating the need for a separate tradesperson. If you continue to use gas for hot water or cooking, those connections remain intact. Before we conclude our visit, we ensure that the new system operates correctly and provide instructions on how to use the controls.

For comprehensive information on what to expect on installation day, refer to our article detailing the heating and cooling installation process.

How Do the Running Costs of Ducted Reverse Cycle Heating Compare to Gas Ducted Heating?

According to Energy.gov.au, the operating costs for ducted gas heating can be substantial due to high gas consumption and the electricity required for the fans. In contrast, ducted reverse cycle systems are generally considered more cost-effective than gas heating. Ducted systems tend to be less efficient than wall-mounted units, primarily because of larger fans and energy loss through ductwork, making proper sizing and duct design essential.

Your running costs will vary based on your home’s size, insulation quality, zoning usage, and whether you have solar panels installed. A reverse cycle system can utilise your solar power during daylight hours, a benefit that is unavailable with gas heating. Our comparison of ducted gas and reverse cycle heating for Melbourne homes provides an in-depth analysis of running cost figures.

How Does the VEU Rebate Function When Transitioning from Gas Ducted Heating?

The Victorian Energy Upgrades (VEU) programme incentivises households that switch from gas heating to an efficient electric system. The rebate applies when an existing gas heating appliance is removed and replaced with a qualifying premium inverter reverse cycle system. Generally, if a home has never had gas heating, the rebate will not apply.

We manage all VEU paperwork during the installation process, and the rebate is deducted from your payment at the point of sale, eliminating the need for you to complete forms or wait for a refund. Our article on the VEU rebate clarifies the eligibility criteria and coverage details.

What Essential Factors Should You Consider Before Accepting a Ducted Heating Installation Quote?

Ducted heating quotes can be complex to compare, as one quote may include elements that another omits. Use these questions to effectively evaluate quotes:

• Is the quoted price comprehensive, with the VEU rebate already included?
• Does the quote encompass new ducting and vents, or does it suggest reusing existing ducts?
• Was the system sized based on an in-home assessment or merely through a phone consultation?
• Is zoning included, and how many zones does the quote accommodate?
• Who will be responsible for removing the old gas heater and capping the gas line?
• Will the installation be carried out by the installer’s own team or subcontracted out?
• What workmanship guarantee accompanies the installation?

Choose Beyond Heating and Cooling for Dependable Ducted Heating Installation in Melbourne’s Northern Suburbs

Beyond Heating and Cooling offers expert installation of ducted heating and cooling systems throughout Melbourne’s northern and northeastern suburbs. Our team comprises qualified refrigeration mechanics and mechanical plumbers who specialise in both refrigerant and gas systems. We hold an ARC refrigerant handling licence (L073783), and all installations are executed by our licensed team, not subcontractors. We provide a robust workmanship guarantee for our services.

Every quote begins with a complimentary in-home assessment. We evaluate your current heating system, ducts, and home layout, discuss the most suitable system options, and provide a quote that includes the VEU rebate where applicable. We collaborate with a wide array of leading heating and cooling brands to recommend the best system tailored to your needs.

If you are contemplating the installation of new ducted heating, contact us at 1800 239 663 or request a quote online. Adam or another team member will be delighted to assist you in exploring options for your home. You can also view our complete range of ducted heating and cooling installations.